4 SQUARE ARRAY, 8 direction Controller LBC8

Four Square, Eight direction, Control Console, based on LBC8ARD mother board manual

Flexible, Four-Square Transmit System Control Console.

Push-button Switch Type, 8-position controller used to control any 4-Square relay unit, 4 or 8 direction.

Designed to control equipment of: 

• LowBandSystems (any of the 4 SQUARE TRANSMIT systems);
• Comtek (ACB-4 Hybrid Four-Square Systems);
• DX Engineering (TFS4 transmit Four Square relay units);
• Array solution Four-Square Vertical Antennas Phased Array;
• RemoteQTH 4SQ - 8direction antenna
• SJ2W 4SQUARE PCB
• ANY OTHER MANUFACTURE 4 or 8 direction Four-Square systems;

FEATURES:

• Preprogrammed, 5 different control programs with different logics, for almost all know Four-Square (4 and 8 direction) relay units;
• You can program controller your self and make your personalized TRUTH table, sink or source or both , 8 control lines;
• CW stub remote relay switch;
• Hot switching lockout using TX_Gnd signal from TX;

• 8 programable control lines, relay outputs for direction control:
• Sink or Cource for all 8 lines;
• Polyfused power lines, short circuits protected;
• 13-30VDC; 1A
• Can control few lines for transmit systems and at the same time few more lines for receive only antenna systems for syncronious operation;
• Can control 3 Source and 5 Sink lines at the same time;
• Can use second, higher (or negative) voltage power supply for long runs of control cables to distant remote switches; 

  Optional features include:

• CW STUB buttons for remote relay stub (or fixed L/C components) switches;
• OMNI button for DXEngineeringand Array Solution Four-Square systems;

REPLACES:

• DX Engineering: Control Consoles DXE-CC-4SQR;
• COMTEK ACB-4A Series Four-Square Control Consoles COM-ACB4A
• Array solution Four-Square Control Consoles AS-4SQ-01
• RemoteQTH 4SQ - 8direction antenna controller

REQUIERS:

• external power supply, 15VDC, 1A, for controller and a 12VDC Four-Square Transmit System;
• one more external power supply, 24-30VDC, 1.5A for remote relay unit, only IF 24VDC relays is used in a Four-Square Transmit System;

Carton size: 220 х 150 х 80 mm / 8,6"x 5,9" x 3,1"
Net weight: ≤0,6 kg / 1,3 lbs